Run our refresh rate test the day your monitor arrives. Plenty of 144Hz monitors spend their first month at 60Hz because nobody told Windows.
On this page
This is a research roundup, not a review. We haven’t had these four monitors on our desk, so the picks below come from each maker’s spec page, checked on 26 October 2026, and the trade-offs between panel types. What you get here: which spec matters on a cheap gaming monitor, four current models that fit, and the two settings to check before your return window runs out.
Why 24-inch 1080p still makes sense on a budget
Frame rate is the whole point of a high refresh monitor, and 1080p is the resolution where a budget graphics card can actually reach 144 FPS or more in competitive games. At 1440p, the same card renders about 78% more pixels per frame.
At 24 inches (23.8 inches of actual screen on most models), 1080p works out to about 92 pixels per inch. AOC lists 92.56 PPI for the 24G15N. That’s sharp enough at a normal desk distance. Go to 27 inches at 1080p and text starts looking soft, which is why 27-inch gaming monitors usually move to 1440p.
Pairing it with a cheap card? Our budget graphics card guide covers what’s worth buying under $150.
144Hz, 165Hz or 180Hz: does the number matter?
Not much. The big jump is from 60Hz to anything above 120Hz. Many budget 24-inch gaming monitors now run at 165Hz or 180Hz instead of 144Hz. Three of the four picks below run at 180Hz.
The extra 36Hz between 144 and 180 only shows up if your PC can hold frame rates that high. In a lighter esports game it might. In a new single-player game on a budget card, probably not. So don’t pay extra for 180Hz, but don’t avoid it either. If the 180Hz model costs the same, take it.
IPS vs VA vs TN on a cheap gaming monitor
This is the choice that actually changes what you see:
| Panel | Good at | Weak at |
|---|---|---|
| IPS | Even color, wide viewing angles | Contrast around 1,000:1, so blacks look gray-ish in a dark room. Some IPS glow in corners. |
| VA | Contrast around 3,000:1, so dark scenes look deeper | Slower dark transitions. Fast motion in dark scenes can leave a smeary trail. |
| TN | Fast motion, and the cheapest route to motion-blur reduction like ZOWIE’s DyAc | Weaker color and narrow viewing angles. Colors shift if you look from above or the side. |
The contrast figures come straight from the makers: Acer lists 1,000:1 native for its IPS Nitro, AOC and LG list 3,000:1 for their VA models, and ZOWIE lists 1,000:1 for its TN panel. Our view: IPS is the safe default for most people. Pick VA only if you mostly play darker, slower games, and TN only if you play competitive shooters seriously.
4 cheap 24-inch gaming monitors worth a look
All four are 1080p and at least 144Hz. Specs are from each maker’s product page. We haven’t measured motion, ghosting or color on any of them, so nothing here should be read as a test result.
| Monitor | Panel | Refresh rate | Stand | Inputs |
|---|---|---|---|---|
| Acer Nitro KG241Y M3 | IPS | 180Hz | Tilt only | 2x HDMI 2.0, 1x DisplayPort 1.2 |
| AOC 24G15N | VA | 180Hz | Tilt only | 1x HDMI 2.0, 1x DisplayPort 1.4 |
| LG UltraGear 24GS50F-B | VA | 180Hz | Not stated on LG’s US page | HDMI, DisplayPort |
| BenQ ZOWIE XL2411K | TN | 144Hz | Height, tilt, swivel | 1x HDMI 2.0, 2x HDMI 1.4, 1x DisplayPort 1.2 |
Acer Nitro KG241Y M3: the safe all-rounder
A 23.8-inch IPS panel at 180Hz with 1ms GTG, 99% sRGB and FreeSync Premium, per Acer’s spec page. Note the small print: Acer lists FreeSync Premium over DisplayPort, so use the DP cable. The stand only tilts. If you want height adjustment, budget for a cheap VESA arm (it has a 100 x 100 mount).
AOC 24G15N: deeper blacks for less
AOC’s page lists a VA panel at 180Hz, 3,000:1 contrast, 1ms MPRT and 4ms GTG, Adaptive Sync, a flicker-free backlight and a 3-year warranty. Earlier versions of this article called it Fast IPS. It isn’t. It’s VA, which is good news for dark games and less good for fast motion in dark scenes.
LG UltraGear 24GS50F-B: the other VA option
LG’s US page lists 180Hz with 1ms MBR, FreeSync, Black Stabilizer and a built-in crosshair and FPS counter, at $142.99 when we checked on 26 October 2026. LG’s French product page confirms the VA panel. Buy it over the AOC if the price is lower that day. On paper they’re very close.
BenQ ZOWIE XL2411K: for competitive shooters
The odd one out. It’s a 144Hz TN panel, so colors and viewing angles are weaker, but ZOWIE’s page lists DyAc, a backlight trick that cuts motion blur when you spray in a shooter. ZOWIE says DyAc dims the screen and doesn’t add input lag. It also has the only height-adjustable stand here (155mm of travel) and runs PS5 and Xbox Series X at 120Hz over HDMI 2.0. Worth it if you play shooters a lot. For anything else, the IPS pick is the easier recommendation.
How to choose in two minutes
- Play a bit of everything? Get the IPS model.
- Mostly dark, slower games (horror, story games) and a dark room? VA.
- Serious Counter-Strike or Valorant and you care about motion clarity more than color? TN with DyAc.
- Check the ports. Use a port the maker lists for the full refresh rate. ZOWIE, for example, lists 144Hz over HDMI 2.0 or DisplayPort 1.2 only. DisplayPort is the safe pick.
- Check the return policy before you click buy. Panel quality can vary from unit to unit, and that’s what the return window is for.
After it arrives: two checks before the return window closes
First, set the refresh rate. Windows often leaves a new monitor at 60Hz. Microsoft’s steps: Settings > System > Display > Advanced display, then pick the highest rate under Choose a refresh rate. If 144Hz or 180Hz isn’t listed, the cable or port is usually the problem. Try the DisplayPort cable from the box. Then confirm it with our refresh rate test.
Second, check the panel. Run the dead pixel test full screen, and the ghosting test if you went with VA. On a new screen, the return window beats any fix. If you find a bright dot or heavy smearing in week one, send it back rather than living with it.
Shopping used instead of new? Walk through our used monitor buying checklist before you pay.
FAQ
Is 144Hz worth it over 60Hz?
For games, yes, if your PC can run above 60 FPS. A 144Hz monitor can show up to 144 frames per second instead of 60, so motion looks smoother and the picture updates sooner. It won’t help if your PC only reaches 60 FPS.
What’s the difference between 1ms GTG and 1ms MPRT?
GTG is how fast a pixel changes from one gray shade to another. MPRT is a measure of perceived motion blur, often reached with backlight tricks. The AOC 24G15N, for example, lists 4ms GTG and 1ms MPRT, so the two numbers aren’t interchangeable.
Should I get IPS or VA on a budget?
IPS for most people, because color and viewing angles are more even. VA if you mainly play dark games, since budget VA panels list about three times the contrast of IPS.
Do I need DisplayPort for 144Hz?
Not always. Check which ports your monitor’s maker lists for full refresh. ZOWIE lists HDMI 2.0 or DisplayPort for 144Hz on the XL2411K. DisplayPort is the safe choice, and Acer lists FreeSync Premium over DisplayPort on its Nitro model.
Is 180Hz better than 144Hz?
Slightly, and only if your PC can hold more than 144 FPS. Many budget 24-inch monitors are 180Hz now, so if it costs the same, take it.
Sources
We haven’t tested these monitors. Specs and the one listed price come from the makers’ pages, checked on 26 October 2026. Prices change daily, so check before you buy.
- Acer: Nitro KG241Y M3 specifications, checked 2026-10-26.
- AOC: 24G15N specifications, checked 2026-10-26.
- LG US: UltraGear 24GS50F-B, checked 2026-10-26.
- LG France: UltraGear 24GS50F-B (panel type), checked 2026-10-26.
- BenQ ZOWIE: XL2411K specifications, checked 2026-10-26.
- Microsoft: Change the refresh rate on your monitor in Windows, checked 2026-10-26.
